Automation and Components

Electronic Stroke Completion Sensor

Will confirm that the end of the stroke has been reached. Installed into hardened mounting block on top of fine adjustment screw on the Model No. 20-29. Triggered via the stroke limit block of the press. Automatically accepts changes in strokes adjustment.

Analog Ram Displacement Sensor

This sensor can be used for interface to third party controls on DirectActing Presses with 0 to 100mm of stroke. Analog displacement sensor is externally mounted for direct and exact measurement of press ram position.

• Part Number: M124xxx

• Resolution: 0.01mm / 0.0004"

• Maximum Travel Speed: 10 m/s 32 ft/s

• Resistance: 5kOhm

• Linearity: 0.1% full scale

• Maximum Operating Voltage: 50v

• Suitable for Press: Nr. 20-29 & 61-76

Precision Ram Position Flag Sensor

This sensor assembly is mounted external to the top of the Direct Acting Press. Typically it is used in conjunction with a SQM Peak Load Monitor to define the monitoring window. Prevents false readings while the component bottoms out (before the spike). Requires minor modification to stroke limit block.

• Part Number: M122Axx
• Accuracy: 0.3mm / 0.012"
• Operating Voltage: 10-30 VDC
• Output: PNP or NPN
• Load Current Capacity: 100mA
• Range from End of Stroke: 0-25 mm / 0-1"
• Suitable for Press: Nr. 20-29
  

Parts Presence Sensor

In order to detect parts presence or measurement, a wide variety of sensor types are used including: proximity, photoelectric, ultrasonic, laser, color, etc. Sensor selection is based on the application requirements.

Tie Rod Ram Position Sensor

Used on Direct Acting & Pneumatic Toggle Presses. Mounted to the cylinder tie rod, feedback of ram position to a SCHMIDT or third party control by detecting an internal magnet. Also available over entire range of press stroke. Available in molded cable or quick disconnect versions.

• Part Number: 401429.xx
• Accuracy Approximately: 1mm / 0.04"
• Operating Voltage: 10-30 VDC
• Output: PNP or NPN
• Load Current Capacity: 100mA
• Suitable for Press: Nr. 20-36
  

Ram Position Sensor

Used on the Hydro-Pneumatic Press, this sensor is mounted to the head casting, feedback to a SCHMIDT or third party control by detecting an internal flag. Also available for AC voltages. Adjustable over entire range of press stroke.

• Part Number: 402081.xx
• Accuracy Approximately: 0.5mm / 0.02"
• Operating Voltage: 10-30 VDC
• Output: PNP or NPN
• Load Current Capacity: 100mA
• Suitable for Press: Nr. 61-68